TIC Inlay Wear Parts

TIC Inlay Jaw Plates

Titanium carbide inserts jaw plates are a type of jaw plate used in crushers. Titanium carbide is a high-strength, high-hardness, and wear-resistant material used to make crusher jaw plates. These inserts are more wear-resistant than traditional steel jaw plates and can extend the life of the crusher. They are also more impact-resistant than steel jaw plates, which can increase crushing efficiency. In general, titanium carbide insert jaw plates are an effective way to improve the performance of a crusher.

TIC Inlay Cone Liners

When crushing ultra-hard stone, the wear resistance of ordinary high manganese steel liners and micro-alloy liners are not very good, and the replacement cycle is very short. In order to solve this problem, the engineers of Qiming Casting have developed titanium carbide inlay cone crusher liners.
Based on the customer’s feedback on the wear and tear of the liner, Qiming Casting engineer’s inlaid titanium carbide rods into the most severely worn working surface. When the stone enters the crushing chamber, the protruding titanium carbide rods are the first to come into contact with the stone. Due to the ultra-hardness of the titanium carbide rods, the titanium carbide rods wear very slowly. On the other hand, the working surface of the high manganese steel, which is the substrate, slowly contacts the stone and by the time the protruding part of the titanium carbide rod has worn away, the working surface of the high manganese steel has hardened.

TIC Inlay Blow Bars

TIC stands for “titanium carbide,” which is a hard and wear-resistant material used in the production of wear parts for heavy-duty equipment. TIC inserts are made by welding small pieces of titanium carbide onto the surface of a metal component, such as a blow bar, to increase its wear resistance and extend its lifespan.

TIC inserts blow bars, therefore, are blow bars that have been enhanced with titanium carbide inserts to improve their wear resistance and durability. This makes them suitable for use in high-wear environments where standard blow bars would wear out quickly.

TIC Inlay Crusher Hammers

TIC inserts crusher hammer is a type of crusher hammer that has been enhanced with titanium carbide (TiC) inserts. Crusher hammers are used in hammer mills and crusher machines to break down rocks, ores, and other hard materials into smaller pieces. They are an important component of crushing equipment and play a critical role in the crushing process.

Titanium carbide inserts are used in TIC inserts crusher hammers to improve their wear resistance and durability. TiC is a hard and wear-resistant material that can withstand high levels of impact and abrasion, making it ideal for use in high-wear applications such as crushing equipment. The TiC inserts are welded onto the surface of the hammer to increase its hardness and toughness, reducing the need for frequent replacements and maintenance.